Used Plumb bob and laser to check alignment of HT frames and top rudder opening skin.
Top section visible here:
Re-aligned and drilled out to A4, using laser to insure alignment. Also added top rudder hinge.
Tuesday, August 21, 2012
8/10 - 8/11/2012 Rear Fuselage Side Skins
Drilled and clecoed "L" angles to the side skins. Drilled, clecoed, and attached side skins to the bottom skin / longeron area.
Used Plumb bob and laser to check alignment of HT frames and top rudder opening skin.
Top section visible here:
8/16/2012
Re-aligned and drilled out to A4, using laser to insure alignment. Also added top rudder hinge.
Used Plumb bob and laser to check alignment of HT frames and top rudder opening skin.
Top section visible here:
Re-aligned and drilled out to A4, using laser to insure alignment. Also added top rudder hinge.
No comments:
Post a Comment