With the rear fuselage riveted, I started on the cabin floor.
Drilled, clecoed, and located the heel support, pedal channel, floor stiffener, and two extruded longerons. I had to cut angles on the ends of the longerons.
Monday, August 27, 2012
8/25 Cabin Floor
I finished riveting the rear fuselage - doing the parts with the A5 rivets, on the thicker, extruded longerons. I discovered I riveted the top rear, which I wasn't supposed to do yet. Oops. We'll see how many I have to drill out later.
With the rear fuselage riveted, I started on the cabin floor.
Drilled, clecoed, and located the heel support, pedal channel, floor stiffener, and two extruded longerons. I had to cut angles on the ends of the longerons.
With the rear fuselage riveted, I started on the cabin floor.
Drilled, clecoed, and located the heel support, pedal channel, floor stiffener, and two extruded longerons. I had to cut angles on the ends of the longerons.
No comments:
Post a Comment