More right wing, nose skin

Things are moving along.  It's really starting to look like a wing now.

Another view:

A 12' wing nose skin with bend in it is pretty wobbly to maneuver in a tight space.  It just takes a lot of patience to check the wing spar angle, and the level of the main spar and the rear spar.  Lots of drilling, and my hands are getting strong using the cleco pliers.  Took a while to set up the straps and slide the nose skin under the rear top skin for drilling.

This is a picture taken inside the wing.

And below is the aileron bellcrank mount, seen through the access hole.

BTW the loose L angle is something I was using to position the ribs under the pre-drilled holes in the skins.